topic Re: Changed post processor screen use. in Fusion Support Forum

Changed post processor screen use.

spancheau — Sat, 10 Dec 2022 02:40:14 GMT

The post processor selection screen has changed. I cannot access the processor I want to use. When I select the post , I get a message box that says "Use posts from fusion 360 library?" It then tells you that these are automatically updated. I cannot get past this to 0pen the selected post processor.

Thanks,

Scott

Re: Changed post processor screen use.

seth.madore — Sat, 10 Dec 2022 15:10:00 GMT

When you click on the post processor, you are prompted on where you want to save the post. Personally, I prefer to save a file to a local drive or the cloud (this prevents overwriting of the post when I know it's running perfectly). So, you are going to either:
A) Turn on Cloud Libraries and save the post to that location

B) Create a folder on your computer, link that in the Library and then save the post to that location on your computer.

I'd recommend option "A", as that will allow you to post your code from any computer you log into.

Re: Changed post processor screen use.

seth.madore — Sat, 10 Dec 2022 15:10:40 GMT

To link a local folder to your Post Library:

Re: Changed post processor screen use.

spancheau — Sat, 10 Dec 2022 19:02:14 GMT

Thank you Seth. The way this was worded as a question with an option, I thought I could let Fusion do the auto updates and there should be a way to just accept that and open the post I wanted. I will do as you suggested.

Thanks again,

Scott