topic Re: Strange and inconsistent results for cross hatching in drawings in Fusion Support Forum

Strange and inconsistent results for cross hatching in drawings

Swarfmaker — Tue, 13 Dec 2022 18:23:13 GMT

Recently, and I don't know when it started, sections in drawings have started to produce inconsistent cross hatch patterns. In the case where two conflicting hatches have occured, I can't do anything to remove one or the other pattern, athough they can be individually edited for style.

Re: Strange and inconsistent results for cross hatching in drawings

jhackney1972 — Tue, 13 Dec 2022 19:09:20 GMT

You need to go back to your model and double check that you do not have two components, or two bodies in the same component, on top of each other. You can also experiment using the Drawing Browser by selecting the components visibility check to find out if you have two on top of each other. Attach your MODEL so the Forum can help you out.

Re: Strange and inconsistent results for cross hatching in drawings

Swarfmaker — Tue, 13 Dec 2022 22:02:26 GMT

I did think that you were on to something there @jhackney1972 . So I looked at the component tree on the drawing to check, and there are no overlapping or duplicate bodies. However, when I un-ticked the visibility of possible offending bodies and then made them visible again, the double hatching transferred to another component! By chasing around using hide/unhide the correct result was eventually obtained. So yours is not the solution I am afraid.

Re: Strange and inconsistent results for cross hatching in drawings

ClintBrown3D — Wed, 14 Dec 2022 06:43:03 GMT

Hey @Swarfmaker

Please share a downloadable link to your drawing, so that I can ask the team to investigate this, or if it is sensitive, feel free to send it directly to me Clint. Brown {a} Autodesk.com

Re: Strange and inconsistent results for cross hatching in drawings

Swarfmaker — Wed, 14 Dec 2022 12:40:01 GMT

Thankyou @ClintBrown3D . Here is the link: https://a360.co/3uRjdbW

On the first page of this drawing and looking under 'Rollers', if Body 9 is hidden then the RH flywheel becomes double hatched. If Body 9 is made visible again it is correctly hatched but the RH flywheel remains double hatched.

Re: Strange and inconsistent results for cross hatching in drawings

ClintBrown3D — Wed, 14 Dec 2022 13:45:02 GMT

Thank you, I'll share with the team and ask them to take a look.

Re: Strange and inconsistent results for cross hatching in drawings

liang_chen — Thu, 15 Dec 2022 03:32:11 GMT

Thanks for the customer feedback.

There is a known case in internal issue system, DID is FDWG-15913. I have added this customer dataset and feedback into the exsiting Ticket.