topic Design advice report is rotated relative to model in Fusion Support Forum https://forums.autodesk.com/t5/fusion-support-forum/design-advice-report-is-rotated-relative-to-model/m-p/11631887#M45198 <P>As shown in pictures attached, undercut, thickness and knife edge displayed on screen are rotated relative to the model analysed. Draft analysis report is fine, but I couldn't attach the picture</P> Tue, 20 Dec 2022 14:35:01 GMT nicolas.beaudoin_MI 2022-12-20T14:35:01Z Design advice report is rotated relative to model https://forums.autodesk.com/t5/fusion-support-forum/design-advice-report-is-rotated-relative-to-model/m-p/11631887#M45198 <P>As shown in pictures attached, undercut, thickness and knife edge displayed on screen are rotated relative to the model analysed. Draft analysis report is fine, but I couldn't attach the picture</P> Tue, 20 Dec 2022 14:35:01 GMT https://forums.autodesk.com/t5/fusion-support-forum/design-advice-report-is-rotated-relative-to-model/m-p/11631887#M45198 nicolas.beaudoin_MI 2022-12-20T14:35:01Z