topic We want to use 2000x1000 paper instead of the A0or A1 in Fusion Support Forum

We want to use 2000x1000 paper instead of the A0or A1

serkanleblebiciVYZ4G — Wed, 21 Dec 2022 19:58:35 GMT

Hi Guys, It is very important for the biggest size for the template border. Because we can sometimes use the big size laser-cutting parts. We have to send laser cutting dwg or dxf format file on as 1:1 scale. However, we do not use the 1200mm above for big parts it is very important and the Fusion360 team has to solve this problem urgently. Any suggestion is not accepted as PDF or any different solution for this issue. Fusion360 team sometimes gives ridiculous advice. They to be attention for this subject.

Re: We want to use 2000x1000 paper instead of the A0or A1

sutherland- — Thu, 22 Dec 2022 07:26:59 GMT

Hi @serkanleblebiciVYZ4G

Fusion 360 does not support custom drawing sheet sizes, unfortunately.

One workaround (not tested!) could be to try scaling the exported PDF if the native PDF ratio is the same.

Re: We want to use 2000x1000 paper instead of the A0or A1

ClintBrown3D — Thu, 22 Dec 2022 09:11:42 GMT

Hi @serkanleblebiciVYZ4G

We have not yet built a custom sheet size feature, this is on our roadmap. For large DXF exports, I’d suggest exporting the DXF directly from the modelling environment.

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-export-a-face-in-DXF-format-in-Fusion-360.html

As always, we take all customer requests seriously and your request for custom sheet sizes has been logged in our feature request database. We use this data to help us prioritise the features that we build.