topic Re: Mouse scrolling not zooming in/out after April update in Fusion Support Forum

Mouse scrolling not zooming in/out after January 2025 update

zack_sybert — Mon, 03 Feb 2025 17:42:45 GMT

Just encountered this issue after the last update which was in January 2025. Immediately after updating my mouse scroll wheel stopped zooming and instead started scrolling. Very annoying and time-wasting. None of the aforementioned solutions worked for Windows. This is most definitely a bug.

@zack_sybert Moderation edited title for clarity.

Re: Mouse scrolling not zooming in/out after January 2025 update

lance.carocci — Mon, 03 Feb 2025 18:40:30 GMT

Please try unchecking Use Gesture-based View Navigation under the General section of Preferences.

Re: Mouse scrolling not zooming in/out after January 2025 update

HughesTooling — Mon, 03 Feb 2025 18:05:33 GMT

Check your settings in preferences. On one of my PCs the setting was changed from Solidworks to PowerMill with the last update.

Re: Mouse scrolling not zooming in/out after April update

zack_sybert — Mon, 03 Feb 2025 18:13:01 GMT

I unchecked 'Use Gesture-based View Navigation' and it fixed my problem. Thanks!

Re: Mouse scrolling not zooming in/out after January 2025 update

geoffX2HF7 — Wed, 12 Feb 2025 12:15:58 GMT

Thanks for the solution, and no thanks for changing basic behavior without warning. UI people never learn.

Re: Mouse scrolling not zooming in/out after January 2025 update

timangus — Mon, 17 Feb 2025 19:22:02 GMT

Just to add another data point; I use RDP to access a Windows installation from my main computer which runs Linux (because Autodesk refuse to port it to Linux, for some reason). A recent update to Fusion resulted in the mouse wheel simultaneously zooming and scrolling, making it virtually unusable. Disabling "Use gesture -based view navigation" has fixed this for me. Oddly, if I accessed the Windows machine via VNC, it didn't exhibit this behaviour.

Re: Mouse scrolling not zooming in/out after January 2025 update

Pylonbob — Tue, 18 Feb 2025 10:06:34 GMT

Unchecking Use Gesture-based View Navigation under the General section of Preferences worked for me thanks. The other problem I had with this update was that it removed my 3d printer, took me a while to realise what had happened to it

Re: Mouse scrolling not zooming in/out after January 2025 update

wnsdl0506 — Thu, 20 Mar 2025 06:37:32 GMT

Very Thanks for infomation, problem solved after turn off gesture navigation option. Why Autodesk change setting without any warning? this is very irritating