topic Re: Just curious if this is a glitch or a problem with modeling in Fusion Support Forum

Just curious if this is a glitch or a problem with modeling

Will1337 — Tue, 31 Jan 2023 04:42:57 GMT

I have run into this issue while learning nurbs modeling in the surface tool work space. I am wondering if maybe this is a bug or something.

Please excuse the unconstrained sketch as I was just trying to create a scenario where this problem shows up for me.

I am trying to learn so if I am doing something wrong please let me know.

Re: Just curious if this is a glitch or a problem with modeling

Phil.E — Tue, 31 Jan 2023 21:51:09 GMT

Thanks for posting.

I tested your design and found some issues. So it's a glitch. I logged a bug report for it.

If you are using this workflow with your non-test design shapes, and run into the same issue, please post again.

(ref: FUS-121654)

Re: Just curious if this is a glitch or a problem with modeling

Will1337 — Wed, 01 Feb 2023 00:44:59 GMT

Thanks, yeah I have run into it a few times, once it happens it seems to corrupt other surfaces

Re: Just curious if this is a glitch or a problem with modeling

TrippyLighting — Wed, 01 Feb 2023 12:57:47 GMT

@Will1337 thanks for reporting this. I've come across it many times and then usually resort to split face or split body with a subsequent delete.
However, to get to a solid body enclosed by these 6 surfaces, you may want to look at the boundary fill tool.

Re: Just curious if this is a glitch or a problem with modeling

Phil.E — Wed, 01 Feb 2023 16:02:28 GMT

I didn't find any corruption. Thanks for posting. When you have an example of a part you are making with this issue, please post again.

Re: Just curious if this is a glitch or a problem with modeling

Will1337 — Thu, 02 Feb 2023 05:52:19 GMT

Oh what I meant was once it happens, all other trim selections seem to do the same thing. Not a corrupted file or anything.

I came across this problem while learning how to model using surfaces, this was just a quick sketch/model that seemed to recreate the problem I haven't really had a chance to make anygthing using this process.