topic Re: Fanuc posting G68.2 error in Fusion Support Forum

Fanuc posting G68.2 error

8waystomake — Fri, 03 Feb 2023 18:57:39 GMT

Using the Fanuc G91 generic post, machine is a yama-seiki with fanuc OI-M control. Post is generating a G68.2 (multi axis?) so i edited the post to false under multiaxis. Now error saying G54 not specified when i repost, plane, axis etc is all specified and correct in model & setup agrees. Where should i look from here.

Re: Fanuc posting G68.2 error

seth.madore — Fri, 03 Feb 2023 19:57:48 GMT

To be clear; you are using a 3 axis machine, correct?
Could you share your file here?
File > Export > Save to local folder, return to thread and attach the .f3d file in your reply

Also, are you using the most recent Fanuc(G91) post processor (should be #43888)

Re: Fanuc posting G68.2 error

8waystomake — Mon, 06 Feb 2023 13:23:18 GMT

Yes, 3 Axis machine. We did figure it out. We had to delete the tool path then re add it. Fusion was hung up and reading the unedited post that read multiaxis = true , even after we had changed it to false.