topic Re: Fusion freezes when adding Auxilliary view to 2D Drawing in Fusion Support Forum

Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Wed, 22 Feb 2023 02:59:30 GMT

I have a project with multiple 2D Drawings. When I attempt 'Create - Auxilliary View' or 'Create - Projected View' to a specific drawing Fusion freezes with the hourglass showing a stays there for hours until I eventually end the task and shut it down. When adding the view the dialogue appears and I can select necessary parameters and place the view. The freezing occurs when pressing Enter to process the request. Fusion is using a lot of CPU time (about 6% which is a lot on a 32-core 4GHz Threadripper) when 'frozen' so it's awfully busy stuck in a loop doing something; just not what I want.

Because it doesn't crash there's no option to send a crash dump and on restart there is no recovery file.

Interestingly 'Create - Detail View' works ok on the same file.

Don't seem to be able to export the drawing either to post here for reference (Ugh!).

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

ClintBrown3D — Wed, 22 Feb 2023 06:54:10 GMT

Hi @iancLTBFX

I’m sorry to hear that you are having trouble. Please share a downloadable link to your drawing, so that I can ask the team to investigate this, or if it is sensitive, feel free to send it directly to me Clint. Brown {a} Autodesk.com

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Wed, 22 Feb 2023 23:17:22 GMT

Clint,

Thanks for the response. I've sent a file share link to you in a private message.

Regards,

Ian

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

ClintBrown3D — Thu, 23 Feb 2023 07:40:02 GMT

Hi @iancLTBFX

Apologies for the inconvenience, but you will need to email me. Unfortunately, I don't always get my DM's, I just checked, and I don't have one from you.

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Sun, 26 Feb 2023 22:44:37 GMT

Hi Clint,

Sent details via email. Tested the link in the DM and it was to the wrong file anyway 😞

Correct link in email.

- Ian

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

ClintBrown3D — Mon, 27 Feb 2023 07:14:06 GMT

Hi @iancLTBFX

I have not received an email yet. Please ensure that you have spelled it correctly, Clint. Brown {a} Autodesk.com

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Mon, 27 Feb 2023 22:22:50 GMT

Sent it to 'Clint.Brown {a} Autodesk.com'. Didn't get a rejected message. Is that not right?

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Mon, 27 Feb 2023 07:31:07 GMT

Incidentally I placed a Projected View in the file and left my system running for about 4 hours (previously left it for 1 hour) and the view was eventually placed correctly and F360 became responsive.

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

ClintBrown3D — Mon, 27 Feb 2023 07:43:19 GMT

Email looks correct, BUT please can you do me a favour and edit that message.

If my email is out on the public internet like that, I will get spammed relentlessly and won't be able to help anyone!!

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Mon, 27 Feb 2023 22:23:13 GMT

Oops. Sorry. Edited.

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Mon, 27 Feb 2023 22:54:18 GMT

Please check your spam folder. My surname is a direct target for Spam filters.

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

ClintBrown3D — Tue, 28 Feb 2023 09:49:17 GMT

Hi @iancLTBFX

Nothing yet. Spam filter is clear. I will send you a direct email that you can reply to.

Re: Fusion freezes when adding Auxilliary view to 2D Drawing

iancLTBFX — Tue, 28 Feb 2023 22:23:00 GMT

Got your email and replied with details. Third time it's been sent to the same email address and I haven't got a 'rejected' response from any of them. Emails are disappearing on your email server somewhere.