topic Missing line in 2d drawings. in Fusion Support Forum

Missing line in 2d drawings.

handingcad — Tue, 28 Feb 2023 08:06:05 GMT

The drawing is missing a line in the box legs for this tank. i feel like i have tried all view properties combinations. when i turn on "shaded with edges", you can se where the line should be, but isn´t.

Re: Missing line in 2d drawings.

johnsonshiue — Tue, 28 Feb 2023 20:14:48 GMT

Hi! This could be model geometry related. Somehow the silhouette edges on the lower left do not show up in the drawing. Try a test real quick. Go back to the model and create a workplane going across the missing edge. Then split the faces using the plane. Do the silhouette edges come up now?

Many thanks!

Re: Missing line in 2d drawings.

handingcad — Thu, 02 Mar 2023 07:44:05 GMT

Thanks for reply.

I was not sure exactly what u meant, but i tried to split the face with a midtplane. And i tried with a plane tangent to face at point. both worked the same, but i now have the split line in another view.