topic Fusion360 not opening in Fusion Support Forum

Fusion360 not opening

keninlb — Sat, 11 Mar 2023 00:00:52 GMT

Fusion 360 was working correctly about a week ago. Tried to open yesterday, splash shield pops up and goes away. There is an icon on the bottom of the tray but nothing happens when clicking or nothing displayed on screen. Have ran the service utility with Repair Fusion 360 and REset Fusion 360. Have gone and uninstalled and reinstalled with no change. Verfied the Windows 10 is up to date 10.0.19045. Any sugestions would be greatly appreciated.

Re: Fusion360 not opening

jhackney1972 — Sat, 11 Mar 2023 01:35:07 GMT

The Forum will need your Fusion 360 log files. You can get these, even if Fusion 360 will not run, by following the process outlined in this web article. Once you get them, make sure to zip them up, if not already so, and attach them to a reply post.

Re: Fusion360 not opening

keninlb — Sat, 11 Mar 2023 02:37:32 GMT

Hi John,

Thanks for looking at this. I have attached what I think is the logs.

Re: Fusion360 not opening

RajkumarIlanchelian — Sat, 11 Mar 2023 03:09:29 GMT

@keninlb @Please try the solution here to see if that helps?

https://forums.autodesk.com/t5/fusion-360-support/fusion-will-not-load-on-my-desktop/m-p/11733797/highlight/true#M167423

Re: Fusion360 not opening

keninlb — Sat, 11 Mar 2023 03:46:24 GMT

Thanks Rajkumar and John.

Deleting of the Registry did bring the fusion back.

Thanks Again !