https://forums.autodesk.com/t5/fusion-support-forum/generative-design-of-a-lawnmower-wheel/m-p/13307379#M4048 <P>Good morning, I need to know if I am applying constraints and loads correctly, as results do not seem consistent with reality.<BR />I have applied two types of loads:</P><P>A moment generated by a force (external moment).<BR />The load from the bearings, which allow the mechanism to rotate.<BR />These loads are applied to the inner bar of the wheel hole, specifically in the obstacle geometry.</P><P>&nbsp;</P> Sat, 08 Feb 2025 11:30:22 GMT a_brigatti1 2025-02-08T11:30:22Z https://forums.autodesk.com/t5/fusion-support-forum/generative-design-of-a-lawnmower-wheel/m-p/13307379#M4048 <P>Good morning, I need to know if I am applying constraints and loads correctly, as results do not seem consistent with reality.<BR />I have applied two types of loads:</P><P>A moment generated by a force (external moment).<BR />The load from the bearings, which allow the mechanism to rotate.<BR />These loads are applied to the inner bar of the wheel hole, specifically in the obstacle geometry.</P><P>&nbsp;</P> Sat, 08 Feb 2025 11:30:22 GMT https://forums.autodesk.com/t5/fusion-support-forum/generative-design-of-a-lawnmower-wheel/m-p/13307379#M4048 a_brigatti1 2025-02-08T11:30:22Z