topic Re: Previous selection of a sketch does not clear after selecting another sketch. in Fusion Support Forum

Previous selection of a sketch does not clear after selecting another sketch.

cad1EWQB6 — Wed, 15 Mar 2023 23:22:17 GMT

After editing a sketch, and finish sketch editing, the selection of the sketch does not clear when selecting another sketch. After some random selecting among the sketches it does clear. The options on right click are also incomplete e.g. save a DXF not seen.

Re: Previous selection of a sketch does not clear after selecting another sketch.

johnsonshiue — Thu, 16 Mar 2023 23:01:43 GMT

Hi! I am not sure I see the behavior. Did you click on the sketch timeline icon when editing the sketch? Could you share a video of the behavior you are seeing?

Many thanks!

Re: Previous selection of a sketch does not clear after selecting another sketch.

TheCADWhisperer — Fri, 17 Mar 2023 11:39:05 GMT

@cad1EWQB6
Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Previous selection of a sketch does not clear after selecting another sketch.

cad1EWQB6 — Fri, 17 Mar 2023 12:36:20 GMT

I need to be at the end of a long editing session as the behaviour only happens then. Some kind of memory leak. Happens on both windows and Mac (but I mainly work on a Mac). The fix is to save and reboot the computer and it all works ok then. I will try to capture it when it happens again.

Mike

Re: Previous selection of a sketch does not clear after selecting another sketch.

g-andresen — Fri, 17 Mar 2023 14:20:54 GMT

Hi,

The behavior has been described here a few times.
I solve it by dragging the cursor in the timeline (sometimes several times) to the start and back to the end.
I'll now run a continuous screencast to catch the effect.

günther