topic Exporting Dwg or dxf from Fusion 360 in Fusion Support Forum

Exporting Dwg or dxf from Fusion 360

chandratigerbuckets — Tue, 11 Feb 2025 01:33:05 GMT

The dwg / dxf drawing exported from Fusion are now not 2D, if you click any line it is showing Z position as well which is not good . Drawing should be only in XY plane not in Z plane.

Its not good if you want to modify dwg/dxf in Autocad afterwards

Please fix the issue

Re: Exporting Dwg or dxf from Fusion 360

HughesTooling — Tue, 11 Feb 2025 08:45:51 GMT

If you set the DWG format to simplified you get a simple 2d drawing.

Pretty sure this has always worked this way for DWG, don't know about DXF. @Phil.E Do you know if anything has changed for DXF exports from the drawing workspace?

Re: Exporting Dwg or dxf from Fusion 360

-KyleWilliams- — Tue, 11 Feb 2025 15:56:11 GMT

Hey,

Sorry you're facing this issue. I've reported it to the team.
You should be able to turn it into a 2D DXF using the following workflow.
https://somup.com/cTnXoyKCTI

Thanks