topic Re: Drawing a line between 2 offset objects in 3D in Fusion Support Forum

Drawing a line between 2 offset objects in 3D

ktnalive — Fri, 14 Feb 2025 07:19:35 GMT

Hi,

I have a 3D object that I had offset from the original, I did this so that I could create 2 walls. Now I need to create a roof and a floor for these two walls. Fusion will not allow me to do so, even when using THIN EXTRUDE. I also wanted to show the distance between the 2 walls, again Fusion will not allow me to do so. how do I fix this?

Attached is a picture of the 2 walls.

The wall on the left is the original.

Re: Drawing a line between 2 offset objects in 3D

TheCADWhisperer — Fri, 14 Feb 2025 13:59:54 GMT

@ktnalive

This should all be very easy.

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Drawing a line between 2 offset objects in 3D

ktnalive — Mon, 17 Feb 2025 22:55:21 GMT

Here is the file you requested. Thanks for your time.

Re: Drawing a line between 2 offset objects in 3D

jhackney1972 — Tue, 18 Feb 2025 00:09:11 GMT

Is the attached model something like you are looking for? By the way, your side panels, in the supplied file, were not aligned, they are now.

Re: Drawing a line between 2 offset objects in 3D

ktnalive — Fri, 21 Feb 2025 00:33:20 GMT

Thanks. Was the alignment the only thing preventing me from creating a ceiling? If not, how did you get the 2 to join?

Re: Drawing a line between 2 offset objects in 3D

ktnalive — Fri, 21 Feb 2025 04:58:34 GMT

I apologize for not addressing your question earlier. However, I have followed your suggestion and successfully uploaded the file.