topic Re: Incorrect drawing values in Fusion Support Forum

Incorrect drawing values

n.cherkasovH7XGC — Thu, 04 May 2023 13:39:57 GMT

Hi,

I have the same strange issue on 2 objects now. There is a simple geometry with round dimensions. Say, a cylinder 24 mm in diameter.

Then I create a drawing, a cross-section. The diameter of this item ends up being 23.99 mm. And I see it in a few occasions. I can see it in cross-sections of perfectly cylindrical objects.

If I simply type it manually, it pretty much kills the point of 3d-CAD to drawing integration. Is there way to fix this bug?

Re: Incorrect drawing values

-KyleWilliams- — Thu, 04 May 2023 13:53:50 GMT

Hey @n.cherkasovH7XGC

I've tried to replicate this with a simple 24mm cylinder as you state and I'm not getting the same results.

If you're able to share a file that you're having this issue on that may help us figure out what is going on.

Thanks

Betreff: Incorrect drawing values

g-andresen — Thu, 04 May 2023 14:21:53 GMT

Hi,

Please share the file for investigation.

File > export > save as f3d on local drive > attach it to the post.

günther