topic Re: Extrusion Error - No Target Body in Fusion Support Forum

Extrusion Error - No Target Body

john_a_sparksss — Mon, 29 May 2023 17:34:15 GMT

I have an SVG imported, worked all of the extrusion features that I need. There is one letter in all of the file that will not extrude. It errors as No Target Body. I can select the letter and it highlights as all the others have to execute the extrusion feature. But it will not complete the function. Any thoughts on how to validate the geometry so I can get the letter to extrude.

Re: Extrusion Error - No Target Body

g-andresen — Mon, 29 May 2023 17:36:31 GMT

Hi,

please share the file

File > Export > save as f3d on local drive > attach to post

günbther

Re: Extrusion Error - No Target Body

john_a_sparksss — Mon, 29 May 2023 22:55:10 GMT

As requested. Any help would be appreciated. See attached

Re: Extrusion Error - No Target Body

john_a_sparksss — Mon, 29 May 2023 22:56:01 GMT

As requested 🙂 See attached. Any help would be GREATLY appreciated

Re: Extrusion Error - No Target Body

john_a_sparksss — Mon, 29 May 2023 22:56:18 GMT

See attached in post below

Re: Extrusion Error - No Target Body

jhackney1972 — Mon, 29 May 2023 23:28:18 GMT

For some reason, you have Cut selected instead of Joint for that one letter. Change it to Join and all is well.

Re: Extrusion Error - No Target Body

john_a_sparksss — Thu, 01 Jun 2023 20:43:04 GMT

Thank you so much!!! All set. Not sure why that was selected as such, but all good now!!!!