topic Quasi-static event simulation contact manager crashes Fusion in Fusion Support Forum https://forums.autodesk.com/t5/fusion-support-forum/quasi-static-event-simulation-contact-manager-crashes-fusion/m-p/12012651#M35046 <P>Contact manager will systematically crash Fusion 360 if I modify too many contact parameters and press OK. I need to make each change (delete or suppress contact or change friction coefficient or contact type) individually, go out of contact manager by pressing OK, save and than open contact manager again to perform the next change to make sure that Fusion will not crash.</P> Mon, 05 Jun 2023 18:28:57 GMT nicolas.beaudoin_MI 2023-06-05T18:28:57Z Quasi-static event simulation contact manager crashes Fusion https://forums.autodesk.com/t5/fusion-support-forum/quasi-static-event-simulation-contact-manager-crashes-fusion/m-p/12012651#M35046 <P>Contact manager will systematically crash Fusion 360 if I modify too many contact parameters and press OK. I need to make each change (delete or suppress contact or change friction coefficient or contact type) individually, go out of contact manager by pressing OK, save and than open contact manager again to perform the next change to make sure that Fusion will not crash.</P> Mon, 05 Jun 2023 18:28:57 GMT https://forums.autodesk.com/t5/fusion-support-forum/quasi-static-event-simulation-contact-manager-crashes-fusion/m-p/12012651#M35046 nicolas.beaudoin_MI 2023-06-05T18:28:57Z