topic Ynt: Strange behaviour SpaceNavigator in latest Fusion 360 in Fusion Support Forum

Strange behaviour SpaceNavigator in latest Fusion 360

teknikL38HP — Fri, 21 Feb 2025 06:42:20 GMT

In Every time when I boot PC and start Fusion 360, my SpaceNavigator does not work. However, if I change the current driver—whether from the new version to the old one or vice versa—and then restart, it starts working.

Here’s the situation:
If the SpaceMouse driver is set to the NEW version, I switch it to the OLD one and restart, and it works. However, after rebooting my PC and launching Fusion 360 again, the issue returns. To fix it, I have to switch the driver back from OLD to NEW and restart Fusion 360, after which it works again.

Betreff: Strange behaviour SpaceNavigator in latest Fusion 360

g-andresen — Fri, 21 Feb 2025 10:31:01 GMT

Hi,

I have been working with the “legacy” setting for a long time now without any problems.

günther

Ynt: Strange behaviour SpaceNavigator in latest Fusion 360

teknikL38HP — Fri, 21 Feb 2025 10:34:53 GMT

I am using 3dxWare latest version 10.9.3.671 with my SpaceNavigator FW:4.14, if you are also using the same setup, may be I will try to reinstall Fusion 360

Ynt: Strange behaviour SpaceNavigator in latest Fusion 360

g-andresen — Fri, 21 Feb 2025 11:13:00 GMT

Hi,

I also have the latest driver, but I work with the “Legacy” setting because it works better.

günther