topic Re: Randomly multiplying every extrusion in Fusion Support Forum

Randomly multiplying every extrusion

Finn.uckelmann — Wed, 12 Jul 2023 13:46:45 GMT

Hello,

As you can see in the picture, every extrusion I make is multiplied no matter what. How can I fix it?

Re: Randomly multiplying every extrusion

HughesTooling — Wed, 12 Jul 2023 14:23:14 GMT

You probably need to share your design as an f3d so we can take a look. Best guess would be you have 3 instances of a component. As all the components will be identical adding an extrusion to one adds it to the others.

Re: Randomly multiplying every extrusion

Finn.uckelmann — Wed, 12 Jul 2023 14:37:26 GMT

Makes sense because I am designing a gearbox with 3 gears.

Re: Randomly multiplying every extrusion

HughesTooling — Wed, 12 Jul 2023 15:03:06 GMT

I'm not sure what's going on. Even though the main component is active, as soon as you create an extrude a different component becomes active. Looking at your design timeline I have to tell you it's a complete mess and I'm not suppressed Fusion's getting confused. Some pointers, fix all warnings and errors in the timeline. If you have a move in the timeline you're probably doing something wrong, if you have a capture position in the timeline you're probably doing something wrong, same goes for remove. I don't know if you'll be able to fix the problems now because you have so many. Look at Rule #1 and start again would be my advice and ask questions before getting too far.

Re: Randomly multiplying every extrusion

g-andresen — Thu, 13 Jul 2023 03:05:48 GMT

Hi,

I think the file is corrupted.
Only after opening the file a second time could I detect the error.
Compute all made the system freeze.

günther