topic Re: Center point offset in projected plane. in Fusion Support Forum

Center point offset in projected plane.

modijenish10 — Sat, 29 Jul 2023 08:56:35 GMT

when I draw the sketch on projected plane, center point is automatically offset as shown in video. I would like to know the reason.. and solution for the same.

Re: Center point offset in projected plane.

g-andresen — Sat, 29 Jul 2023 11:49:46 GMT

Hi,

You must first enter the geometry of your component into the active Sketch. Then you can e.g. bind a new hole (circle) at the centre of the hole in the component.

Deactivate the grid. Then you get a better orientation on the reference part.

(view in My Videos)

günther

Re: Center point offset in projected plane.

TheCADWhisperer — Sat, 29 Jul 2023 10:20:30 GMT

@modijenish10

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

That geometry looks a bit rough. Do you have a reference of what you are attempting to model?

If you use the BORN Technique as much as possible and practical there is seldom a need to create workplanes.

Re: Center point offset in projected plane.

modijenish10 — Mon, 31 Jul 2023 08:18:27 GMT

Thanks for the solution..it get corrected when I turned off the grid.