topic Re: Bug in animating parts of a sketch in Fusion Support Forum

Bug in animating parts of a sketch

david78737 — Tue, 22 Aug 2023 11:58:25 GMT

Selecting an axis in the copy/move command not working

https://www.loom.com/share/50a4caeade1e46419f0c752900a04b3c?sid=6c3ee591-064f-4029-acc7-bb2056b9ed22

Re: Bug in animating parts of a sketch

TheCADWhisperer — Tue, 22 Aug 2023 12:15:30 GMT

@david78737

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Why do you want to Rotate?

Can't you make the Component and then use Joint?

Are there any unresolved issues highlighted in your Timeline?

Is your sketch geometry fully defined?

Re: Bug in animating parts of a sketch

jeff_strater — Tue, 22 Aug 2023 16:08:45 GMT

@david78737 - Set Pivot is modal. You have to click on the checkbox to finish setting the pivot, then you will be able to rotate sketch geometry:

Re: Bug in animating parts of a sketch

jeff_strater — Tue, 22 Aug 2023 16:10:39 GMT

here is a video:

(view in My Videos)

Re: Bug in animating parts of a sketch

g-andresen — Tue, 22 Aug 2023 18:14:37 GMT

Hi,

From your screencast, it is not possible to tell if the selected sketch elements are prevented from rotating by constraints. But you can see that there are several missing coincidences (white dots).
For an analysis you would have to upload the file.

Günther

Re: Bug in animating parts of a sketch

TheCADWhisperer — Tue, 22 Aug 2023 18:21:02 GMT

@g-andresen wrote:
...sketch elements are prevented from rotating by constraints.

In @jeff_strater video you can see that Rotate automatically removes conflicting constraints.