topic Re: Fusion inserts unknown feed data in drill tool steup in Fusion Support Forum

Fusion inserts unknown feed data in drill tool steup

Mk_Tactical — Sun, 27 Aug 2023 23:20:59 GMT

To replicate this errror save a drill in your main tool library, create a driling operation in your project and then go to project tool manangement page and update tool number, then regenerate tool paths and go to edit your drill speeds and feed and you'll see crazy numbers inserted in your feedrate fields. 2 screenshots attached, 1 with correct data and other with data inserted by Fusion360. Its a very nasty bug that sneaks up on you

sent a 16mm HSS drill 9000mm/pm in steel, very bad outcome

Re: Fusion inserts unknown feed data in drill tool steup

jhackney1972 — Mon, 28 Aug 2023 00:53:58 GMT

I believe this program error was addressed in the latest update a day or two ago. Check your version and make sure it is the one shown.

Re: Fusion inserts unknown feed data in drill tool steup

seth.madore — Mon, 28 Aug 2023 10:46:14 GMT

@jhackney1972 wrote:

I believe this program error was addressed in the latest update a day or two ago. Check your version and make sure it is the one shown.

Yep, this is the same issue as the OP