topic Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360 in Fusion Support Forum

Issue with View Cube Rotation Causing View Jumps in Fusion 360

Fehér_Tamás — Wed, 30 Aug 2023 12:07:42 GMT

Hey everyone,

I've come across an issue while using Fusion 360 that I wanted to bring to your attention. It seems like there's a bug related to the rotation of the View Cube located in the upper right corner of the interface.

When I try to rotate the View Cube to the right using my mouse, it's causing unexpected view jumps. For instance, if the "Right" label is initially in front of me and I attempt to rotate it to the right, instead of smoothly transitioning to the "Front" view, the view jumps abruptly to a different angle, often showing the "Back" view.

This behavior is quite frustrating and disrupts the workflow, especially when I'm trying to navigate around my model with precision. I've tried restarting the software and even my computer, but the issue persists.

Has anyone else experienced this problem? If so, have you found any workarounds or solutions? It would be great to know if there's a way to resolve this, as it's slowing down my design process.

Looking forward to your insights and suggestions!

Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360

Fehér_Tamás — Mon, 11 Sep 2023 15:00:45 GMT

The problem still exist!

Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360

Fehér_Tamás — Tue, 19 Sep 2023 08:44:58 GMT

Sad but the problem still exist!
Please let me know if you need more information.

I know of several people who have the same problem.

Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360

rnl9t — Mon, 02 Oct 2023 19:16:06 GMT

I have this problem too, and cannot find any solution in the forums, nor any setting in preferences that might help. It appears that if you go far enough off-screen, the view cube does an abrupt 180 degree rotation. It is beyond frustrating. It did not used to work this way.

Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360

Fehér_Tamás — Wed, 11 Oct 2023 09:36:45 GMT

I also noticed that as the mouse leaves the monitor area, the error occurs (the phenomenon occurs in all directions). Unfortunately, there is still no solution, and several people have already reported that they are experiencing the same issue.

Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360

Fehér_Tamás — Wed, 11 Oct 2023 09:54:48 GMT

I think I found the solution!
The recommended 150% (in my case it was 125%) had to be set to 100% so that the error does not occur.
So far, it has been good even with a (150%) 125% increase; however, I just realized how to address the issue.

@rnl9t Please report back if the same solution worked for you.

Re: Issue with View Cube Rotation Causing View Jumps in Fusion 360

denis_natea — Fri, 15 Dec 2023 18:44:37 GMT

Thank you for the tip. It works for me too. I have to keep it at 100% and is fine. The cube is larger is size than normal but does the trick