topic the new Configuration Panel is missing in Fusion Support Forum

the new Configuration Panel is missing

bart_alarm — Tue, 19 Sep 2023 20:30:12 GMT

Just installed the latest version on Mac v.2.0.17244 and the Configuration panel is not visible. Reset All Toolbar Customizations, restarted. nothing.

Re: the new Configuration Panel is missing

seth.madore — Tue, 19 Sep 2023 20:32:51 GMT

There is going to be a staggered rollout over the next few weeks to all users. This was done intentionally for stability reasons. Give it some time, you'll see it soon enough, provided you have a Commercial or EDU license.

From the "What's New":
If you don’t immediately see Configurations in your toolbar, no need to worry. We will be releasing Configurations slowly over the course of the next month, so if you do not see it today you should be able to use the functionality very shortly. By adopting a staggered approach, we aim to seamlessly integrate this powerful feature into the Fusion 360 ecosystem.

Re: the new Configuration Panel is missing

bart_alarm — Tue, 19 Sep 2023 20:33:20 GMT

missed that. ty

Re: the new Configuration Panel is missing

BRadovan — Wed, 20 Sep 2023 07:53:09 GMT

I started new update and there is no Configuration panel.

I wanted to see if I need to check it in Preferences and there in Preview Features new problem.

Workspaces are gone. just Manufacturing left.

I tried reset and nothing happens.

Re: the new Configuration Panel is missing

gautham_kattethota — Wed, 20 Sep 2023 13:52:18 GMT

@BRadovan Configurations is not part of preview features. It is being rolled out to users gradually and pretty soon you will have it.

Regards

Gautham

Re: the new Configuration Panel is missing

holla2040 — Mon, 02 Oct 2023 07:17:59 GMT

Will configurations eventually appear for 'single-user storage' or only to teams? The toolbar icons appear if I'm connected to a team but not in single-user. Thanks.

Re: the new Configuration Panel is missing

g-andresen — Mon, 02 Oct 2023 08:10:41 GMT

Hi,

@holla2040 wrote:

Will configurations eventually appear for 'single-user storage' or only to teams? The toolbar icons appear if I'm connected to a team but not in single-user. Thanks.

only team !!

günther

take a look at this thread #4

Re: the new Configuration Panel is missing

holla2040 — Mon, 02 Oct 2023 15:35:43 GMT

"only team!!", do you know why?

Re: the new Configuration Panel is missing

gautham_kattethota — Mon, 02 Oct 2023 15:59:15 GMT

@holla2040 , we are investing a lot on the underlying technologies behind Fusion Team hubs, and so significant additions to functionalities in Fusion, such as Configurations, are being added to and supported on Team hubs.

Regards

Gautham

Re: the new Configuration Panel is missing

holla2040 — Mon, 02 Oct 2023 16:14:16 GMT

OK, that makes sense. I've commented on several YT videos about the 'single-user' issue. I'll reference your answer and suggest in the future they mention 'this is a teams only feature' in future content. It's a little confusing because this was a staged release and the 'teams' development wasn't mentioned. So many questions exist, where is the feature? Thanks for the reply.

Re: the new Configuration Panel is missing

holla2040 — Mon, 02 Oct 2023 16:40:02 GMT

If significant additions will be added for teams, then its time for me to learn about that. I'm looking around to see how to move projects from single-user to my team. Thanks, this has been very helpful.

Re: the new Configuration Panel is missing

g-andresen — Mon, 02 Oct 2023 16:42:29 GMT

Hi,

Remember that AD originally wanted to end single user storage by spring 2023.
So it couldn't be a bad idea to check out this contribution to the transfer of designs to Teamhub.

günther

Re: the new Configuration Panel is missing

holla2040 — Mon, 02 Oct 2023 17:02:28 GMT

I need to hang out in the Fusion forum because this is "end single user storage" comment is news to me. Thanks, following your transfer link now.

Re: the new Configuration Panel is missing

dorsetdesignbuild — Mon, 09 Oct 2023 13:38:25 GMT

Its been over 3 weeks since your post - and still configurations is not enabled on my system. Has the roll-out completed yet? Without knowing when this is supposed to be done, its impossible to know if we have a problem or not.

Re: the new Configuration Panel is missing

gautham_kattethota — Mon, 09 Oct 2023 14:59:56 GMT

Hi @dorsetdesignbuild

Configurations has been enabled to most entitlement types, except Educational. Could you confirm what kind of an entitlement you have. Also, note that the functionality is only available on Teams only and not for Single-User storage. Also, let me know the Fusion build number.

Regards

Gautham

Re: the new Configuration Panel is missing

dorsetdesignbuild — Mon, 09 Oct 2023 15:13:27 GMT

I have an educational license and I'm set up in a team. When will configurations be available to Educational licenses? I'd like to include configurations in my upcoming course - "Designing Timber Frames in Fusion 360".

Re: the new Configuration Panel is missing

gautham_kattethota — Mon, 09 Oct 2023 20:15:17 GMT

It is good to hear that you would like to consider Configurations for your course. We expect educational customers to have access to Configurations most likely by end of this week.

Gautham

Re: the new Configuration Panel is missing

patl1 — Mon, 09 Oct 2023 20:48:54 GMT

Same situation here. I have an education license and want to include it in my course material