topic Re: Sketch Dimensions - unable to display with a body behind it in Fusion Support Forum

Sketch Dimensions - unable to display with a body behind it

hackish — Wed, 20 Sep 2023 16:21:00 GMT

I'm trying to add a dimension to the innermost circle in sketch3.

When you try to apply it, the UI is unable to display the dimension unless you hide the body behind it.

If you adjust the view you can see the dimension only if there is no part of the body behind it.

If you make the body completely invisible, it functions as expected.

Steps to reproduce:

Open the attached file

Edit sketch 3

Attempt to add a dimension to the circle as shown above.

The workaround is simple and I'm not stuck, but this may be a bug

Re: Sketch Dimensions - unable to display with a body behind it

g-andresen — Wed, 20 Sep 2023 17:03:56 GMT

Hi,

I can't recreate the behaviour.

(view in My Videos)

1. test it in another file.
2. Update the graphics driver
3. Start the Service Utilities > Repair

günther

Re: Sketch Dimensions - unable to display with a body behind it

hackish — Thu, 21 Sep 2023 01:03:28 GMT

As suggested I have run the repair utility and updated the nvidia drivers but the problem persists. I normally run the insider version, and it exhibits the same behaviour. I will try to capture a video to illustrate. Is your example also on a PC?

Re: Sketch Dimensions - unable to display with a body behind it

g-andresen — Thu, 21 Sep 2023 08:16:06 GMT

Hi,

@hackish wrote:

Is your example also on a PC?

YES!

günther