topic Re: Marking areas in Fusion Support Forum

Marking areas

hofmesa — Mon, 25 Sep 2023 09:49:37 GMT

Hello,

I got an issue which come up a few days ago. If I want to mark several areas for extrusion as usual, they are no longer highlighted in blue. Can I reactivate this in the settings?

Thank you for the information on this

Re: Marking areas

seth.madore — Mon, 25 Sep 2023 10:03:15 GMT

Would you be able to share your Fusion file here?
File > Export > Save to local folder, return to thread and attach the .f3d/.f3z file in your reply.

If you can't share your file, can you at least share some images of what you're seeing?

Re: Marking areas

hofmesa — Mon, 25 Sep 2023 13:39:35 GMT

Thank you for your fast response,

usually when I want to do an extrude, I can choose every area of my sketch(this areas are marked in blue colour). But now there is no blue marking an I cant see what areas are choosen.

I haven't changed anything in the basic settings of Fusion360

Any ideas ?

Re: Marking areas

seth.madore — Mon, 25 Sep 2023 13:51:51 GMT

Seems to be working for me:

(view in My Videos)

Re: Marking areas

g-andresen — Mon, 25 Sep 2023 13:56:55 GMT

Hi,

1. update your graphic drivers

2. TRY: Service Utilities > Repair

günther

Re: Marking areas

hofmesa — Mon, 25 Sep 2023 14:55:57 GMT

Hey,

does it work whne you whant to mark all areas with "ctrl" ?

Re: Marking areas

hofmesa — Mon, 25 Sep 2023 14:57:14 GMT

I installed the actuall graphic driver and do the repair like your instructions.

both doesn't work

Re: Marking areas

hofmesa — Mon, 25 Sep 2023 15:06:56 GMT

Hm I

done the reset in the service utilities and then switch graphic presets --> Limit effects

Now it works fine again.

Thank you guys for your tips and fast response.

Kind regards,

Bernard

Re: Marking areas

HughesTooling — Mon, 25 Sep 2023 15:23:58 GMT

You could also try the different graphics drivers in Fusion. This has worked for others.

Re: Marking areas

g-andresen — Mon, 25 Sep 2023 15:29:49 GMT

Hi,

please note in the future not to reply by "Post Reply" but to reply directly to an individual request.

günther