topic Re: Mirrored line doesn't cut through object when extruded. in Fusion Support Forum

Mirrored line doesn't cut through object when extruded.

m.haindl0720221 — Mon, 02 Oct 2023 10:50:31 GMT

Hello everyone,

I am still pretty new and unexperienced with Fusion 360 but had a problem where I couldn't find or understand the solution to it in this forum. I mirrored a line and now want to extrude it on both sides so I can cut corners of an object. Somehow I can only extrude on the side where I drew the original line and not on the mirrored side. I don't get what the issue is - I assume for everyone in this forum it will be an easy task to find a solution for that. I added screenshots and the Fusion file.

Thank you!

Best,

Marlene

Re: Mirrored line doesn't cut through object when extruded.

g-andresen — Mon, 02 Oct 2023 11:38:23 GMT

Hi,

1. no screenshots attached

2. which components/bodies and sketches are you talking about?

günther

Re: Mirrored line doesn't cut through object when extruded.

davebYYPCU — Mon, 02 Oct 2023 12:43:49 GMT

Because there is no profile (blue shading) on the mirrored side. Project the body face into the sketch, and it will work.

Might help...

Re: Mirrored line doesn't cut through object when extruded.

TheCADWhisperer — Mon, 02 Oct 2023 12:50:39 GMT

@m.haindl0720221

See Attached.