topic Re: Nothing Changes in Fusion Support Forum

Nothing Changes

mnaylor1 — Sun, 08 Oct 2023 17:49:08 GMT

I haven't used Fusion 360 before. Got in, quickly realized I can't see anything. Menus open and change, and it seems like anything I make is actually there and selectable. But nothing actually shows up. Can't change viewpoints either.

Re: Nothing Changes

TheCADWhisperer — Sun, 08 Oct 2023 21:15:49 GMT

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Nothing Changes

mnaylor1 — Sun, 08 Oct 2023 21:50:04 GMT

Here you go

Re: Nothing Changes

jhackney1972 — Sun, 08 Oct 2023 22:39:13 GMT

Your model displays just fine, but it is a bit odd. This is probably because you are having issues seeing what you are doing. I would suspect that your Graphic Card is giving your issued, either the drivers are not up to date or you are using the wrong Graphic Driver selection in Fusion 360 Preferences. The model I see is shown below and labeled. Also I show where you can select different Graphic Drivers in Preferences. Fusion 360 will have to restart between driver changes.

Re: Nothing Changes

mnaylor1 — Sun, 08 Oct 2023 23:22:26 GMT

After trying a few options this did the trick, thank you very much.