topic Re: Can't select all drawings from circular pattern to extrude in Fusion Support Forum

Can't select all drawings from circular pattern to extrude

CraftyLures — Thu, 07 Dec 2023 07:08:52 GMT

Hi guys,

I am trying to extrude my circles which I draw using circular pattern.
Those are the little white spots on the image.
When trying to extrude I can only select on at the time, why?

Re: Can't select all drawings from circular pattern to extrude

davebYYPCU — Thu, 07 Dec 2023 07:15:41 GMT

... one at a time ....

You can window select them and keep selecting until you have them all highlighted.

Might help....

Re: Can't select all drawings from circular pattern to extrude

CraftyLures — Thu, 07 Dec 2023 07:17:07 GMT

I have tried it.

The problem is when I select second with shif, ctr or without it deselect the first on some how?

Re: Can't select all drawings from circular pattern to extrude

davebYYPCU — Thu, 07 Dec 2023 08:11:20 GMT

Hide all but the sketch the circles are patterned in.

Window select them, and then unhide the body the operation will be performed on.

Might help....

Re: Can't select all drawings from circular pattern to extrude

g-andresen — Thu, 07 Dec 2023 10:42:47 GMT

Hi,

I recommend making the pattern from a feature (hole) rather than in the sketch.
This makes it easier to change the number afterwards.

(view in My Videos)

günther

Re: Can't select all drawings from circular pattern to extrude

TheCADWhisperer — Thu, 07 Dec 2023 13:04:11 GMT

@CraftyLures

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Can't select all drawings from circular pattern to extrude

CraftyLures — Thu, 07 Dec 2023 13:08:04 GMT

Yes, sure and thanks for you help offer.
I think I have messed up my sketch somewhere as I have warning too.
Any way please find it attached.

Re: Can't select all drawings from circular pattern to extrude

TheCADWhisperer — Thu, 07 Dec 2023 13:16:52 GMT

@CraftyLures

Are you willing to start over from scratch with step-by-step instructions?

Re: Can't select all drawings from circular pattern to extrude

CraftyLures — Thu, 07 Dec 2023 13:22:07 GMT

Yes, sure thanks.

Re: Can't select all drawings from circular pattern to extrude

TheCADWhisperer — Thu, 07 Dec 2023 13:34:20 GMT

@CraftyLures

What is your Design Intent - what are you attempting to model?

Do you have a picture of something similar that already exists in the real world?

Are the interferences in these corners part of your Design Intent?

Re: Can't select all drawings from circular pattern to extrude

TheCADWhisperer — Thu, 07 Dec 2023 13:41:07 GMT

@CraftyLures

Start a new file.

Start a new sketch and sketch a circle at the Origin;

Select Dimension and then right click select Radius...

Then enter a radius of 160.518797237

What do you note about the color of the circle after entering the dimension?

Does the radius of 160.518797273 really really match your true Design Intent?

What machine will you use to achieve this radius?

What measuring instrument will be used to inspect this radius?

Re: Can't select all drawings from circular pattern to extrude

TheCADWhisperer — Thu, 07 Dec 2023 13:49:08 GMT

@CraftyLures

Now sketch a Horizontal line across the circle below the Origin...

Select the line and right click select Construction (or mash x on your keyboard).

Dimension the line as 50mm from the Origin (or whatever your true Design Intent really really is (it wasn't 50mm in your original file but close to 50)).

Trim off the bottom of the circle.

Add a 3Point Arc

Selecting the endpoints of the construction line first and then the Origin...

Attach your file here for next set of steps...

(As we go through this we will dramatically simplify everything you did.)