topic Re: Generative design: WebGL required in Fusion Support Forum

Generative design: WebGL required

jacob_beissel — Fri, 29 Dec 2023 10:24:44 GMT

Hi,
Unfortunately, it is not possible for me to view my results, which were created with generative design. I get the error message: "WebGL required. This element cannot be displayed because WebGL is disabled on this device." I have an Asus Zenbook UM5302TA with an AMD Ryzen 7 6800U processor and an integrated AMD Radeon 680M graphics card. The graphics card is not listed with the certified graphics cards in Fusion 360. Is that the problem? What can I do now?
Greetings and Thanks for your Help!

Re: Generative design: WebGL required

jorge_garcia — Wed, 03 Jan 2024 21:26:03 GMT

Hi @jacob_beissel,

I hope you're doing well. I think this needs to be in the Generative Design forum. I've asked the mods to move it, however if you want to write the message again on that forum, that would be OK to.

Let me know if there's anything else I can do for you.

Best Regards,

Re: Generative design: WebGL required

owenchen0408 — Fri, 12 Jul 2024 15:22:12 GMT

Same problem here, does anyone have a fix? I tried converting anderlain driver to Pro driver and still didn't work