topic issue with saving the file as DWG in Fusion Support Forum

issue with saving the file as DWG

abinessa — Tue, 02 Jan 2024 21:22:02 GMT

Hi guys, I try to save the file as DWG but it does not work. Please help me in the attachment the picture. Thanks.

Re: issue with saving the file as DWG

jhackney1972 — Tue, 02 Jan 2024 22:25:30 GMT

Can you attach one of the models that will not save as DWG. If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section, of a forum post, to attach it.

Re: issue with saving the file as DWG

abinessa — Tue, 02 Jan 2024 22:35:30 GMT

in the attachement. I found my software says the following not connecting to internet is that an issue to convert the file and how to fix it although i am connecting to internet now????

Re: issue with saving the file as DWG

jhackney1972 — Tue, 02 Jan 2024 22:41:29 GMT

Yes, you must be connected, in Fusion 360, with the internet. If you look at the screen capture below, you will see the icon where I am on the internet. If you are off the internet, the slider will be red. Using your mouse, slide it to the online position. If Fusion 360 sees the internet, it will turn to green like mine. The file you attached is attached here in DWG format.

Re: issue with saving the file as DWG

abinessa — Tue, 02 Jan 2024 22:46:50 GMT

I got these above and does not connect????

Re: issue with saving the file as DWG

jhackney1972 — Tue, 02 Jan 2024 22:51:27 GMT

As it says, are you running a Proxy Server, or Security Software like a VPN service? You can configure Fusion 360 to work with a Proxy Server using the Preferences dialog. If you have VPN running, like I do, I would simply select "Trust Anyway" and move on.

Re: issue with saving the file as DWG

abinessa — Tue, 02 Jan 2024 22:57:40 GMT

I did it still not connecting to the internet

Re: issue with saving the file as DWG

abinessa — Tue, 02 Jan 2024 23:03:15 GMT

I get this when i try to connect online

Re: issue with saving the file as DWG

jhackney1972 — Tue, 02 Jan 2024 23:07:39 GMT

You might want to take a look at this Forum post. I also notice you are working to an Autodesk Representative on this post. Follow his advise as I have nothing else to add.