topic How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees. in Fusion Support Forum

How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Wed, 03 Jan 2024 00:50:01 GMT

How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

davebYYPCU — Wed, 03 Jan 2024 02:22:11 GMT

Plane on Angle, at 45 deg

Sketch centre points.

Use Hole Tool from sketch Plane.

Might help....

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Wed, 03 Jan 2024 03:22:12 GMT

I am new to Fusion so some of the instructions are not clear. Is there a
video that shows this?
Also, how can I cut out a hole or profile on the side of a box?
Thanks

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

davebYYPCU — Wed, 03 Jan 2024 04:43:14 GMT

What I said.

Might help....

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Wed, 03 Jan 2024 09:11:12 GMT

Thank you for your help.

If anyone else could add more that would be great!

Thanks again

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

g-andresen — Wed, 03 Jan 2024 09:32:20 GMT

Hi,

Please share the file.

File > export > save as f3d on local drive > attach to post.

günther

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Wed, 03 Jan 2024 09:57:12 GMT

This comes from tinkercad.

I would like to drill B at 45 C at 45 around the block as a demo.

I do not have holes drawn in the sides yet.

But I will need to carve shapes in the sides as well. But I do see how
to do this.

Thanks

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

davebYYPCU — Wed, 03 Jan 2024 10:35:47 GMT

File from Tinkercad is STL format.

My suggestion does not work for your (missing) file format.

Might help....

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

g-andresen — Wed, 03 Jan 2024 10:39:18 GMT

Hi,

Please provide at least pictures for a better understanding.

Günther

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Wed, 03 Jan 2024 21:17:12 GMT

Here is the file converted to fusion.

What I need is a visual on how to drill the 4 corners at B 45 C45. I
just want to located the 4 corners, so it does not need to drill deep.

I am looking for a way to verify the setup. Not sure if fusion can do
this, I cannot find a video that shows this.

If you know of one please let me know.

Thanks

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

davebYYPCU — Wed, 03 Jan 2024 22:26:47 GMT

No file.

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Thu, 04 Jan 2024 01:32:12 GMT

Here it is

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

jhackney1972 — Thu, 04 Jan 2024 02:04:51 GMT

No file again. You cannot attach files from an email link, you have to come to the Forum and Attach them to a post.

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Thu, 04 Jan 2024 04:45:45 GMT

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

g-andresen — Thu, 04 Jan 2024 10:21:14 GMT

Hi,

Is that what you want to achieve?

(view in My Videos)

günther

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Thu, 04 Jan 2024 18:58:12 GMT

yes, that's it!
No speech, I am new to fusion so explaining what you are doing in the
video would help me a lot!

Thanks!

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

g-andresen — Thu, 04 Jan 2024 21:03:11 GMT

Hi,

@pdjXU638 wrote:
yes, that's it!
No speech, I am new to fusion so explaining what you are doing in the
video would help me a lot!

Follow screencast and timeline.

1. create a diagonal
2. insert a plane on the path at the start/end point of this diagonal
3. this plane takes up the sketch for the hole and the countersink and ...
4. ... forms the basis for an offset plane, which is required for drilling a hole along the diagonal and also for the subsequent countersink
5. drilling and countersinking are transferred to the 4 corners in a circular pattern

Re: How to Drill at 45 degrees? And cutting holes at 90 degrees? I have a box with holes on the sides I need to mill out and I need to drill at 45 degrees.

pdjXU638 — Thu, 04 Jan 2024 21:32:12 GMT

3 Thumbs Up!!!
This gives me a great head start!
Thank you very much