topic Re: Was McMaster-Carr removed? in Fusion Support Forum

Was McMaster-Carr removed?

Bjanders — Wed, 01 Mar 2023 19:56:54 GMT

Has McMaster-Carr been removed Fusion 360?

The knowledgebase still references it:

https://knowledge.autodesk.com/support/fusion-360/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-insert-a-standard-part-into-a-Fusion-360-design.html

Re: Was McMaster-Carr removed?

jhackney1972 — Wed, 01 Mar 2023 22:01:16 GMT

Nope, the McMaster-Carr Component option is still under the Insert drop-down.

Re: Was McMaster-Carr removed?

davebYYPCU — Thu, 02 Mar 2023 02:14:04 GMT

In Personal Licence? I don't have both to check.

Re: Was McMaster-Carr removed?

jhackney1972 — Thu, 02 Mar 2023 03:19:48 GMT

McMaster-Carr is still available under the Insert menu using a Fusion 360 Personal License also.

Re: Was McMaster-Carr removed?

davebYYPCU — Thu, 02 Mar 2023 04:50:10 GMT

Thought so,

only thing I can suggest, is there is a tool active, that prevents the Insert until the tool is completed.

Might help....

Re: Was McMaster-Carr removed?

Bjanders — Thu, 02 Mar 2023 19:23:30 GMT

It didn't show because I was in offline mode. I was in offline mode because of the Server Verification Warning:

That I just added some info to in this topic:

https://forums.autodesk.com/t5/fusion-360-support/unable-to-validate-a-security-certificate/td-p/10438025

Surprisingly though, the two other "insert part" options were available in offline mode, but not McMaster-Carr.

Re: Was McMaster-Carr removed?

ansaldijoshua — Sun, 31 May 2026 00:39:32 GMT

I have the personal license, but under the Insert tab, the McMaster carr component is shaded and not clickable.. How do I fix this issue??

Re: Was McMaster-Carr removed?

TheCADWhisperer — Sun, 31 May 2026 01:59:09 GMT

@ansaldijoshua

Change to Hybrid Modeling.

Re: Was McMaster-Carr removed?

ansaldijoshua — Sun, 31 May 2026 02:29:26 GMT

Thank you! Worked like a charm!

Re: Was McMaster-Carr removed?

jhackney1972 — Sun, 31 May 2026 12:18:21 GMT

You must be in Assembly Mode to use the McMaster-Carr feature. It is logical, you cannot add "components" in the Single Part mode of Intent Driven Design.