topic Re: Inherited holes not recognised in drawings in Fusion Support Forum

Inherited holes not recognised in drawings

daniel.wikmanQZUM9 — Tue, 30 Jan 2024 14:17:15 GMT

Hi there,

I have a part B that inherits from another part A, both of which have holes (threaded and non-threaded) created within in file.

When creating a drawing for part B, the holes inherited from part A are not recognised in the drawing. i.e. not shown in hole table or hole/thread note.

Is this information completely lost when doing so or is there a fix/check box i may be missing?

Thanks

Re: Inherited holes not recognised in drawings

ClintBrown3D — Tue, 30 Jan 2024 14:29:37 GMT

Hi @daniel.wikmanQZUM9

Are you inserting the file with the holes into a new design, or deriving the file into a new design?

Please share a downloadable link to your 2D drawing (it will automatically include all the files), or if it is sensitive, feel free to send it directly to me Clint. Brown {a} Autodesk.com

Re: Inherited holes not recognised in drawings

daniel.wikmanQZUM9 — Tue, 30 Jan 2024 14:55:30 GMT

Hi Clint,

I am deriving the part in a new design and adding additional features to it. Can share the file later today if necessary.

Re: Inherited holes not recognised in drawings

ClintBrown3D — Tue, 30 Jan 2024 15:34:37 GMT

Hi @daniel.wikmanQZUM9

Unfortunately, holes in the derived component will not come through in drawings, as the derive does not carry these features forward.