https://forums.autodesk.com/t5/fusion-support-forum/save-as-mesh-settings-do-not-save/m-p/14089486#M217474 <P>Right Click on a Component or a Body, Save as Mesh.<BR />Select 'Refinement Settings' and set to 'Custom'<BR />Change the 'Surface Deviation' to 0.025 and Max Edge Length to 1.<BR />Click OK and saves the stl file.<BR /><BR />Try the same process again, and the 'Surface Deviation' and 'Max Edge Length' have changed again.</P><P>It is not Saving the settings for the Custom Settings.</P><P>&nbsp;</P><P>I had reported this a long time back, after it changed with a Fusion update. Feedback was that it would get fixed. It never was. Please try harder.</P><P>&nbsp;</P> Tue, 14 Apr 2026 07:32:28 GMT info83PHN 2026-04-14T07:32:28Z https://forums.autodesk.com/t5/fusion-support-forum/save-as-mesh-settings-do-not-save/m-p/14089486#M217474 <P>Right Click on a Component or a Body, Save as Mesh.<BR />Select 'Refinement Settings' and set to 'Custom'<BR />Change the 'Surface Deviation' to 0.025 and Max Edge Length to 1.<BR />Click OK and saves the stl file.<BR /><BR />Try the same process again, and the 'Surface Deviation' and 'Max Edge Length' have changed again.</P><P>It is not Saving the settings for the Custom Settings.</P><P>&nbsp;</P><P>I had reported this a long time back, after it changed with a Fusion update. Feedback was that it would get fixed. It never was. Please try harder.</P><P>&nbsp;</P> Tue, 14 Apr 2026 07:32:28 GMT https://forums.autodesk.com/t5/fusion-support-forum/save-as-mesh-settings-do-not-save/m-p/14089486#M217474 info83PHN 2026-04-14T07:32:28Z