topic Re: Drawing Dimension Snap Bug in Fusion Support Forum

Drawing Dimension Snap Bug

bbtfabrications — Thu, 02 Jan 2025 15:27:22 GMT

I'm having an issue when I'm dimensioning a drawing.

When dimensioning I will typically right click(Blue Circle) and select the snap option I want. The problem comes when I try to do another right click after that selection. Most of the time when I right click, the dialog box either flashes and goes away or just doesn't pop up.

I've been able to repeat this on almost every drawing I make so I don't see a reason to upload my project but I have included a video of the issue.

Re: Drawing Dimension Snap Bug

jhackney1972 — Thu, 02 Jan 2025 17:01:04 GMT

No Bug here. I believe you will have better luck getting the Snap dialog box is you make sure you right click OUTSIDE the drawing view box. I will sometimes get a flicker in the right click menu due to the face I accidentally right click on the View Boundary Box.

If this does not help, then I would suggest you have a graphic problem.

Re: Drawing Dimension Snap Bug

bbtfabrications — Thu, 02 Jan 2025 20:18:56 GMT

Thanks for your response but the problem happens whether I'm clicking inside or outside the view box.

I'll try updating my graphics driver.

Re: Drawing Dimension Snap Bug

bbtfabrications — Thu, 08 Jan 2026 22:47:59 GMT

Hello, I'm posting again as this is still a problem.