Inconstant text in Drawing

RobertR7U933 — Tue, 06 Jan 2026 21:47:02 GMT

Several related item in reference to holes on the drawing, in reference to the image supplied.

1) holes at angles to not respond to the Dimension Diameter button. Only hole planar to the drawing surface do. This also include to trying to add a center line to the circle. Reference yellow Box in image,

2) You need to use a text leader and thus fractions show in a smaller font (yellow box) that from the Dimension Diameter button (red box)

3) if you try and copy the larger font fraction and add a symbol (Diameter) it does a drop character

4) I can get a full size fraction put it look like 16 3/8in. Note if I add a space between the 8 and the i it converts to the smaller fraction (yellow box)

5) The program supports 1/2, x/4 but not x/16 or x/32, unlike the Dimension Diameter, does not do the switching to the smaller fraction.

Green box Dimension Diameter, yellow and red Text Leader

Re: Inconstant text in Drawing

liang_chen — Mon, 12 Jan 2026 02:14:06 GMT

Thanks for the feedback.

Dimension is only supported in orthographics view, but not perspective view. And Leader test is supported in both orthograhpics and perspective view.

topic Inconstant text in Drawing in Fusion Support Forum

Inconstant text in Drawing

Re: Inconstant text in Drawing