topic Re: Hole and thread note not working when feature is from a derived model in Fusion Support Forum

Hole and thread note not working when feature is from a derived model

marcel_rossol — Thu, 18 Dec 2025 09:30:03 GMT

I have a model, with threaded hole features. Later i inserted the design into another one using Insert derive. In the new design I added additional threaded hole features.

I created a drawing from the design. I'm not able to add a note to the hole features from the derived model. I can add notes to the additional holes.

I'm on version v.2605.1.52.

I will add that the designs are created as a Part design (Intent Driven Design)

Re: Hole and thread note not working when feature is from a derived model

liang_chen — Fri, 19 Dec 2025 02:13:23 GMT

Thanks for sharing the feedback. It is a valided issue, and has been tracked as internal ticket for dev investigation. DID is FUS-230130.

Re: Hole and thread note not working when feature is from a derived model

mikahb — Sun, 18 Jan 2026 19:12:37 GMT

Just wanted to say I found this today also. Bummer, lots of manual notes on these drawings which is always a bad idea.