topic Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up in Fusion Support Forum

Exporting Drawings as a DXF and Simplified DWG not working - follow up

Felipe.G — Tue, 25 Nov 2025 21:56:13 GMT

Hi When exporting/saving a Fusion Drawing as a DXF or Simplified DWG the file does not match saving as a DWG (not simplified).....Our issues is that some splines are converted into Arcs that are not close to the spline shape, we opened the files to compare using Autodesk TrueView 2026 and as shown on the attached pictures the files convert the spline to Arc without following the spline shape

Thank you for your help

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

mohammed.aliTDPXK — Wed, 26 Nov 2025 04:43:36 GMT

Hello @Felipe.G ,

can you please share us the problematic file?

You can send me a direct message or mail me at mohammed.ali@autodesk.com

Thanks!

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

Felipe.G — Wed, 26 Nov 2025 06:14:50 GMT

Hi Mohamed, Thank you for your attention I have send an email with the files to check

Thank you

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

mohammed.aliTDPXK — Fri, 28 Nov 2025 11:47:14 GMT

Hello @Felipe.G ,

Thanks for the files, as mentioned in email, please send the original file which shows the issue shared in images(we can connect over zoom to discuss more), but with the file you send I can see the exported dxf and simplified dwg file is not same as in fusion. I have added an internal ticket(FUS-227400) to track it.

I will check with my team on this issue.

Thanks!

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

Felipe.G — Fri, 05 Dec 2025 03:56:02 GMT

Hi Adam, Fusion Team, is there any updates on the issue for the DXF and DWG exports thank you

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

mohammed.aliTDPXK — Fri, 05 Dec 2025 04:34:53 GMT

Hi @Felipe.G ,

As mentioned above, I have created an internal ticket on this and team will investigate, at this point I am not sure when this will be fixed, but the team will look on this. I will get back to you when I have more details

Thanks!

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

Felipe.G — Mon, 05 Jan 2026 05:01:12 GMT

Exported Files Comparison

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

CGBenner — Mon, 05 Jan 2026 19:36:03 GMT

@Felipe.G - Thank you for sharing more files with the group.

@mohammed.aliTDPXK - Hello, with everyone just getting back from the Holiday break, have you heard of any updates on this question?

Re: Exporting Drawings as a DXF and Simplified DWG not working - follow up

mohammed.aliTDPXK — Tue, 06 Jan 2026 01:51:10 GMT

Hello @CGBenner ,

This is tracked internally as (FUS-227400). This is already in teams bucket(cannot ensure when this will be fixed). I will once again remind the team working on this.

Thanks!