topic Re: Patterning a web feature no longer works? in Fusion Support Forum

Patterning a web feature no longer works? - Fusion

Alchemistjewelers — Tue, 18 Nov 2025 17:24:40 GMT

Hi,

In the past I have always been able to easily make tray dividers by using a web to create the first divider and then patterning the web feature. Typically the only caveat to this method is that you have to use the "adjust" compute mode in the pattern. I just opened up a previously saved model that I wanted to adjust the divider spacing of and it seems like I can no longer pattern the web feature in it. I then created a new, simple test model and am having the same issue? Am i going crazy or is this broken? I am currently running the free individual license, if that matters.

This post has been edited due to: @heather_tracy added the product to the title to help more community members find this topic.

Re: Patterning a web feature no longer works?

TheCADWhisperer — Tue, 18 Nov 2025 16:26:58 GMT

@Alchemistjewelers

Did you previously pattern the sketch or the feature?

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Patterning a web feature no longer works?

Alchemistjewelers — Wed, 19 Nov 2025 00:49:17 GMT

Ive attached my original file where i discovered the problem.

in the timeline, R-Pattern1 and R-Pattern2 are the 2 patterns that no longer work. I have these set up with parameters colum_divisions and row_divisions.

Thanks!

Re: Patterning a web feature no longer works? - Fusion

arjun_pillaiZCXQN — Wed, 19 Nov 2025 04:42:06 GMT

Hi @Alchemistjewelers ,

Thank you for taking the time to report this issue. I was able to reproduce the behavior on my end, and I’ve raised a ticket (FUS-226058) to the team for further investigation.

Re: Patterning a web feature no longer works? - Fusion

crunch9KHEA — Sun, 04 Jan 2026 23:23:37 GMT

Has there been any update on this? Several of my designs are now broken due to this issue.

Re: Patterning a web feature no longer works? - Fusion

swapnil.hamdapureDDSVZ — Wed, 07 Jan 2026 13:44:24 GMT

Hi @crunch9KHEA, I'm pleased to inform you that we have fixed this issue. This will be available in the upcoming major release around January 20.