https://forums.autodesk.com/t5/fusion-support-forum/using-parameters-in-flat-pattern/m-p/13812694#M209278 <P>How do I use the defined user patterns from the primary 3D model in the flat pattern sketch environment? Is there anyway to call a user parameter from the 3D model to use in sketches on a flat pattern?&nbsp;</P><P>&nbsp;</P><P>For example, our custom fuel tanks are almost 100% generated by a parameter table, which includes thickness and baffle spacing for fuel tanks in the 3D model creation. When I create the flat pattern for the fuel tank, I also use a sketch to create engraving lines which indicate where the baffles should be located. I have to lay this out manually for each tank, but if I could use my user parameters, it would be automated in the template and save 5 minutes for each tank.&nbsp;</P> Tue, 16 Sep 2025 11:35:57 GMT jamieSW32L 2025-09-16T11:35:57Z https://forums.autodesk.com/t5/fusion-support-forum/using-parameters-in-flat-pattern/m-p/13812694#M209278 <P>How do I use the defined user patterns from the primary 3D model in the flat pattern sketch environment? Is there anyway to call a user parameter from the 3D model to use in sketches on a flat pattern?&nbsp;</P><P>&nbsp;</P><P>For example, our custom fuel tanks are almost 100% generated by a parameter table, which includes thickness and baffle spacing for fuel tanks in the 3D model creation. When I create the flat pattern for the fuel tank, I also use a sketch to create engraving lines which indicate where the baffles should be located. I have to lay this out manually for each tank, but if I could use my user parameters, it would be automated in the template and save 5 minutes for each tank.&nbsp;</P> Tue, 16 Sep 2025 11:35:57 GMT https://forums.autodesk.com/t5/fusion-support-forum/using-parameters-in-flat-pattern/m-p/13812694#M209278 jamieSW32L 2025-09-16T11:35:57Z