topic Preview Error before going on Generate in Fusion in Fusion Support Forum

Preview Error before going on Generate in Fusion

vijayakumar_pandi2YWLZ — Thu, 12 Jun 2025 00:13:57 GMT

Hi All, I am trying to run a generative design on my model, after setting up the right geometries - Preserve, Obstacle and Starting shape with just a vertical load... however, when I press on preview it is failing with an error..can you pls help on it..

Re: Preview Error before going on Generate in Fusion

dsouzasujay — Sun, 15 Jun 2025 16:52:49 GMT

Hi @vijayakumar_pandi2YWLZ ,

Can you Attach prior designs that you have already completed in Autodesk Fusion?

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply

Do you mind sending up the complete log files?

Help -> Support & Diagnostics ->Diagnostics log files. This will generate a zip file that you can upload.

At this stage, I assume you are running Fusion but not able to live update to the newer version?

Re: Preview Error before going on Generate in Fusion

henderh — Wed, 18 Jun 2025 14:48:41 GMT

Hi @vijayakumar_pandi2YWLZ,

You can try removing the Obstacles and the Preview may succeed. If not, then remove the starting shape and recheck.

As Sujay mentioned, we'll be happy to take a closer look when we have the study setup.

Hope this helps,