topic Re: Beer Flight Board in Fusion Support Forum

Beer Flight Board

svweber — Sun, 25 Feb 2024 04:53:09 GMT

I'm looking to print beer flight boards for 4 5oz tulip style glasses. I have the design done, just need to figure out how to make the holes for the glasses. I want them to match the outside shape of the glasses so they fit nicely. The board will be .75" thick. So the holes need to be bigger on the top layer, and smaller on the bottom, but rounded to match the glass shape. How do I accomplish this? Thanks!

Re: Beer Flight Board

Warmingup1953 — Sun, 25 Feb 2024 10:00:17 GMT

Revolve. Are you familiar with importing an image as a Canvas and then calibrating that?

Re: Beer Flight Board

g-andresen — Sun, 25 Feb 2024 10:14:04 GMT

Hi,

Do you want to insert the glasses from the front or from the top?

Günther

Re: Beer Flight Board

TheCADWhisperer — Sun, 25 Feb 2024 11:07:28 GMT

@svweber wrote:
I have the design done..

@svweber

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Beer Flight Board

svweber — Sun, 25 Feb 2024 14:46:37 GMT

I have the measurements of the glass and so the measurements for the hole. Not sure if that is the same thing. Forgive my lack of knowledge here, just started designing a few weeks ago.

Re: Beer Flight Board

svweber — Sun, 25 Feb 2024 14:47:53 GMT

I have legs on the bottom so the board sits up, so the glass will be suspended. We insert the glass from the top.

Re: Beer Flight Board

g-andresen — Sun, 25 Feb 2024 16:08:17 GMT

Hi,

create your profile in sketch 2 and try this

(view in My Videos)

günther