topic Re: Tangent plane bug in Fusion Support Forum

Tangent plane bug

daniel_lyall — Tue, 11 Apr 2017 05:20:58 GMT

I found this bug when validating my way to do what was needed in this post https://forums.autodesk.com/t5/design-validate-document/how-to-counterbore-a-hole-on-a-cylinder/td-p/7008133

Screencast and file attached

All it is, try and do a tangent plane and select a origin faces for it to be squire to and see what happens, as a test I did what can be seen in the screencast and it worked as it should.

Re: Tangent plane bug

Phil.E — Tue, 11 Apr 2017 15:25:36 GMT

Daniel,

I don't see a screencast, but are you perhaps seeing this bug?

https://forums.autodesk.com/t5/design-validate-document/tangent-plane-glitch/td-p/6563777?nobounce

Thanks,

Re: Tangent plane bug

daniel_lyall — Tue, 11 Apr 2017 20:53:51 GMT

Here's the screencast same bug as that post

Re: Tangent plane bug

Phil.E — Tue, 11 Apr 2017 20:55:09 GMT

Daniel,

Thanks, that is exactly what I was thinking. I've added this case to the bug report.

Best regards,