topic How to cutout a angle in 3d extrusion in Fusion Support Forum

How to cutout a angle in 3d extrusion

digitalhomeserviceswa — Sun, 03 Mar 2024 00:00:16 GMT

Hi all, I'm having trouble cutting out an angled shape in a 3d extrusion. I created a shape in the sketch (3d) that has an angle and then performed an extrusion. Now on that angle that's now a 3d block, I want to again create an angle that I want to cutout of the 3d block. I place a new ketch plane where I want to draw the angle and then extrude (cutout) on that plane but each time I do so it's not following my angle. It always cuts out at 90 degrees from the drawn line.

I'm stuck. Hope someone can help me.

Re: How to cutout a angle in 3d extrusion

g-andresen — Mon, 04 Mar 2024 09:30:11 GMT

Hi,

Please share the file.

File > export > save as f3d on local drive > attach to post.

günther

Re: How to cutout a angle in 3d extrusion

davebYYPCU — Mon, 04 Mar 2024 10:15:51 GMT

Duplicated question from here. No file.