topic Re: Problems with Extrude function in Fusion Support Forum

Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 18:20:03 GMT

I have created my desk top on top of the legs I have created however when I extrude one of the corners has a whole in it. See image.

How do I prevent this from happening. It's important to sort out today.

Regards

Taylor

Costic Studio

Re: Problems with Extrude function

jhackney1972 — Tue, 05 Mar 2024 18:23:17 GMT

Please attach your model. If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section, of a forum post, to attach it.

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 19:08:55 GMT

How dose the export help with this problem.

Re: Problems with Extrude function

g-andresen — Tue, 05 Mar 2024 19:22:04 GMT

Hi,

@Mr_WTaylor wrote:

How dose the export help with this problem.

Then we could see from the extrusion menu whether the circle profile is missing during extrusion.

günther

Re: Problems with Extrude function

jhackney1972 — Tue, 05 Mar 2024 19:30:12 GMT

Turn this around, if I posted the information you have given the Forum, would you have a clue what I was doing to cause the issue. I think you will easily see why the Forum can help quicker, and with more accuracy if you had your model to see where things are go wrong. You also mentioned you were in a hurry. Providing the model will probably get a much quicker answer instead of the Forum users taking multiple guesses.

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 21:09:51 GMT

how do I attach the file

Re: Problems with Extrude function

jhackney1972 — Tue, 05 Mar 2024 21:11:14 GMT

The method is outline in my post, Message #2.

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 21:13:30 GMT

"Providing the model" how do I do this

Re: Problems with Extrude function

jhackney1972 — Tue, 05 Mar 2024 21:17:03 GMT

As I posted before in message #2, but I will add it again. By the way, you must use your Forum post to attach it, not email.

If you do not know how to attach your Fusion 360 model follow these easy steps. Open the model in Fusion 360, select the File menu, then Export and save as a F3D or F3Z file to your hard drive. Then use the Attachments section, of a forum post, to attach it.

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 21:19:43 GMT

ive exported it but nothing happened

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 21:21:26 GMT

It is only giving the option to attach a url, photo or video.

Re: Problems with Extrude function

jhackney1972 — Tue, 05 Mar 2024 21:24:19 GMT

You use the Attachment Section, at the bottom of a Reply Post, not the icons at the top.

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 21:27:52 GMT

hope this works.

Re: Problems with Extrude function

jhackney1972 — Tue, 05 Mar 2024 21:47:20 GMT

For some reason the top of the one table leg is above the sketch profile. I could not determine exactly why but it is an easy fix as shown in the video. Model is attached.

(view in My Videos)

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 22:21:26 GMT

thank you it's fixed

Re: Problems with Extrude function

Mr_WTaylor — Tue, 05 Mar 2024 22:24:06 GMT

It's another topic but is it possible to create moving components or do I need to duplicate the file in order to show the component down and up.

Re: Problems with Extrude function

davebYYPCU — Tue, 05 Mar 2024 22:34:36 GMT

Joints - only work on components, not bodies.

Down Up, sounds like Slider Joint.

Might help...

Re: Problems with Extrude function

Mr_WTaylor — Wed, 06 Mar 2024 12:56:54 GMT

there revolute joints.