Post procesing SIMPLE G CODE (

Anonymous — Tue, 27 Jun 2017 17:20:53 GMT

Hello everyone Can anybody help me with a postprocessor for my plasma. The G code should look like this

G90 G17 G21

F2400

G0 X1103 Y38.5

G1 Y61.5 G1 X903 Y61.5

G1 Y38.5

G1 X1103 Y38.5

G0 X1113.5 Y56.0622

M8 G1 X1110 Y50

G0 X0Y0

Is there any post-processor for such g code? If not, can you help me to make or modify some of the existing ones? THANK YOU

Re: Post procesing SIMPLE G CODE (

mike.tessier — Tue, 27 Jun 2017 17:57:28 GMT

Hi @Anonymous,

Thanks for posting and welcome to the Fusion community!

Unfortunately, it's going to be a little difficult to point you in the right direction without knowing more about your machine. I'm unsure what kind of plasma cutter you are using, however you may be able to use on of the generic post processors we have for plasma cutters. Searching that site for "plasma" should bring up the generic posts we offer.

http://cam.autodesk.com/posts/

The post processor library is linked below. I would start there. Should you find that the generic post doesn't meet your needs, you can either create a posting over in the HSM Post Processor forum for assistance in modifying the post on your own, or you could reach out to one of our partners that offers post customization services.

I hope this helps! Please let me know if you have any questions or concerns.

Cheers,

topic Post procesing SIMPLE G CODE ( in Fusion Support Forum

Post procesing SIMPLE G CODE (

Re: Post procesing SIMPLE G CODE (