topic Re: Components in assembly not visible in Fusion Support Forum

Components in assembly not visible

rmeesala — Sun, 20 Aug 2017 21:47:22 GMT

I don't why my components in my assembly are not visible. I can see it in the tree and the visible icon lights up too but my components are not visible. Any idea what is going on ?

Re: Components in assembly not visible

innovatenate — Sun, 20 Aug 2017 22:28:02 GMT

Are all of the bodies also visible? Is there a higher level like a subassembly that is not visible?

You might try right clicking the root assembly and select Show all components.

I hope that helps. If not, can you share a screenshot of the browser/workspace? Maybe that will help to see what is happening. You could also share the design and I'll be happy to take a look.

Thanks,

Re: Components in assembly not visible

rmeesala — Sun, 20 Aug 2017 22:56:23 GMT

Nathan:

Yes, all the components are visible. Sorry, I can't share the assembly but I noticed that I can pull only some of the components.

Re: Components in assembly not visible

TrippyLighting — Sun, 20 Aug 2017 23:21:56 GMT

@rmeesala wrote:

Nathan:

... Sorry, I can't share the assembly but I noticed that I can pull only some of the components.

Hmmm, lets see. No screenshot, can't share the file, or make a screencasts, at best rudimentary information.

Let me take a look at my crystal ball ... yep, that's whatI thought. Pitch black!

Re: Components in assembly not visible

innovatenate — Mon, 21 Aug 2017 00:01:46 GMT

It is difficult to say what is happening based upon the given information.

Did you check the bodies folder to make sure that visibility isn't toggled on the body level of the browser?

It could be related to component activation. Do you have a component activated or is the root component (the component at the top of the browser) activated?

You can always share something with me via private message if that would work.

Re: Components in assembly not visible

Jorge_Jaramillo — Sun, 08 May 2022 04:03:00 GMT

Hi,

Not displaying the components of any project is a behavior of Fusion 360 sometimes after I'm offline from internet, as when I move to some other place, with no internet connection between.

I'm running Fusion latest version, as you can see in the attached image.

All components bodies are visible. You can see some of them in the browser.

Everything is visible.

The only way I found to solve this issue is to re-start Fusion.

Best regards,

JorgeJ