topic Re: copy and rotate sketch in Fusion Support Forum

copy and rotate sketch

NoHandsNeeded — Tue, 22 Aug 2017 03:35:44 GMT

hi every one how can i copy this sketch and move it around 90* on the circle?

thanks in advance

No Hanfds

Re: copy and rotate sketch

Anonymous — Tue, 22 Aug 2017 04:45:54 GMT

open your sketch you are using in the sidebar rightclick n it copy it and go to the upper part where you can see your file name right click and click paste. then move it to se the copied object click m and you can see the little cricle try to movooe it to rotate it

Re: copy and rotate sketch

masa.minohara — Tue, 22 Aug 2017 04:56:10 GMT

Hi @NoHandsNeeded,

Thank you for posting! I have made a screencast that shows how to set pivot to rotate sketch. Please make sure to hit the Done button before rotating the sketch. Hopefully this helps!

Also, this "Support" forum board is dedicated to troubleshooting issues regarding Fusion 360. We have another forum board called "Design, Validate & Document" which is more suitable for this kind of topic 🙂

Re: copy and rotate sketch

NoHandsNeeded — Tue, 22 Aug 2017 07:49:05 GMT

I am still confused on how to copy a sketch I don't know why it won't work for me

Re: copy and rotate sketch

masa.minohara — Tue, 22 Aug 2017 07:56:44 GMT

Thank you for your response! Could you record a screencast so I can see what is going on?

Re: copy and rotate sketch

patilsm — Tue, 22 Aug 2017 09:01:11 GMT

Hi,

Please check my attached screen cast for different ways for Copy-Move operation.

Where I shown :- only Move, Copy and Move, Using Circular pattern make copy.

Please let me know If this thing not going to fulfill you requirement.

Thanks,

Sagar