Compensation off in 2d contour (with wrap toolpath)

sheepdog20 — Tue, 22 Aug 2017 20:57:51 GMT

Hi. i have a problem with chamfers around a guitar body, specifically generating a tool path with a radius round-over cutter....i just want to create a toolpath around the body, bottom and top and use a roundover bit to soften the edge but whatever i try fusion360 will not export a .nc file , although sometimes it shows a sucssefull simulation,.....help

Ray

Palfray guitars

Re: Compensation off in 2d contour (with wrap toolpath)

mike.tessier — Tue, 22 Aug 2017 22:03:43 GMT

Hi @sheepdog20,

Thanks for posting! I'm sorry to hear about this issue! Are you receiving any sort of error message from Fusion when the .nc file fails to export? If so, would you mind sharing a screenshot of the error message?

Are you experiencing this issue with any other design or is it just the one that you had mentioned? If this is only happening with the design you mentioned, would you mind sharing the design with me? We have a great article linked here that describes the many ways that you can share your designs to collaborate with others. For the purposes of troubleshooting this issue, I would recommend sharing a public link to the design with me. If for whatever reason you are unable to share the link publicly, feel free to send the link to me directly in a private message.

Thanks in advance for the information! Please let me know if you have any questions or concerns - I am always happy to lend a hand!

Cheers,

topic Re: Compensation off in 2d contour (with wrap toolpath) in Fusion Support Forum

Compensation off in 2d contour (with wrap toolpath)

Re: Compensation off in 2d contour (with wrap toolpath)